RIGHT PATCH 2C is a latex modified cement based repair mortar. RIGHT PATCH 2C can be used from a featheredge to an inch in one application. The latex adds strength, durability and freeze thaw resistance.

USE AND APPLICATIONS

• Floors

• Ramps

• Sidewalks

• Flowable underlayment

• Topping

• Balcony decks

FEATURES AND BENEFITS

• High strength 5000 psi in 28 days

• Provides strong wear resistant patch

• Uniform Light Gray appearance

• Easy to use 2 part system

• Interior or Exterior

• Long working time

Coverage Rates

The mixed unit will yield approximately 0.42 cubic feet.

PACKAGING

RIGHT PATCH 2C is a unit consisting of 44 lbs of RIGHT PATCH 2C powder and 1 gallon of RIGHT PATCH 2C liquid.

APPEARANCE

Light gray

DIRECTIONS FOR USE: 

SURFACE PREP

Proper surface prep for all horizontal materials is critical. Surface must be clean from dirt, grease, oils and other contaminants. Loose concrete must be removed until a sound substrate is exposed. Pre-wet the area to a surface saturated dry (SSD) condition.

MIXING

Add the powder to the liquid gradually. Using a slow speed jiffy mixer, mix for 3 minutes until lump free. DO NOT ADD WATER.

APPLICATION

Discharge material from mixer or pail and place on floor. Spread with a trowel to the thickness that is required. For surface leveling, use a screed before troweling. Product will achieve final set in 1 to 2 hours depending on temperature, humidity and wind.

CLEAN UP

Clean tools with water before RIGHT PATCH 2C hardens

RESTRICTIONS

Do dampen concrete or use RIGHT WELD to bond

Do re-establish floor joints when used as an overlay or topping

Do mix the powder into the liquid

Do not apply under 40 degrees

Do not use a solvent based curing compound